MLCS Router Speed Control 15 AMP
Free Shipping on Orders over $50
MLCS Router Speed Control is a 15 amp-110V speed control. Woodworkers use this control to reduce speed of the router without reducing torque. Electronic feedback maintains speed by increasing voltage to motor as load increases. Work at the best speed for the router bit and the wood you are using. Simply plug in speed control then plug your router into the speed control. Adjust speed from 0 RPM to full speed.
Features
The Standard Duty Speed Control features a high impact plastic case, and is recommended for home shops.
Less tear out • Stops burning • Feed at comfortable rate
Better, safer results with large diameter panel raising bits
Less wear on bits • Less noise • Softer starts at lower speeds
Adjustable speed from 0 RPM to full speed
3 position rocker switch- Variable / Off / Full Speed
Full power and torque at all speeds
Go back and forth from any preset speed to full speed at the flip of a switch
Works with most routers 3-1/4 HP or less • 120V
Give your router a feature only available on expensive routers
Easy to use- Simply plug in speed control and plug your router into the speed control- turn dial slowly for best results. (Speed control has a clip that can be worn on your belt, hung on wall, or left loose).
Dust Cover Included (not shown in photo)
Warning !!! Will not work with soft start or variable speed routers. Will not work with "AC capacitor start induction" type motors.
Remember, when purchasing a variable speed control, heavy duty is not always better! Speed controls are calibrated by load rating, so match your speed control to the power requirements (amperage) of your tool!
You May Also Like
