Slot Cutter Router Bits | 3 Wing Assembly | MLCS
MLCS Slot Cutter Router Bits are 3 wing cutters that create shiplap joints, tongue and groove joints, T-moldings, rabbeting. Three wing carbide tipped with 8 mm (approximately 5/16") bore, and 1-7/8" large diameter. Cuts 1/2" deep when used with our arbor and bearing. To reduce depth of cut, use larger bearings. Use for cutting slots or kerfs.
To determine the proper bearing, use the following formula:
Bearing Outer Diameter = Large Diameter of Bit minus (2x Desired Cut Depth)
Or click on our Easy to Use Depth of Cut Guide
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
Product Options
You May Also Like
