Flush Trim - Pattern Router Bits Kit with Top & Bottom Bearings 1-3/8″ CL | MLCS
Need Product Support?
1.800.533.9298
MLCS FlushTrim-Pattern Router Bit with Top & Bottom Bearings removes precise amounts of material from the edge of doors or very large panels.
Great for whenever size makes it difficult to use a router table.
By varying the bottom bearing diameter, you can accurately remove 1/16", 1/8" or 3/16" in two passes.
TIP: When using the bit, for the first pass adjust the bottom bearing to run at the bottom of your stock, removing the designated amount from the top of the stock. For the second pass, readjust the bit height to allow the top bearing to run along the previously cut top of your stock, completing the trimming operation.Kit Includes:
#8813: Top & Bottom Bearing Flush Trim/Pattern Bit with two 3/4" OD bearings.
Large Diameter: 3/4". Cut Length: 1-3/8". Overall Length: 3". 1/2" shank.
3 additional bearings (5/8, 1/2, and 3/8" OD).
Hex Key.
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
You May Also Like
