MLCS Dovetail Jig Master Set with 1/4" & 1/2" Shank Bits
MLCS Dovetail Jig Master Set has everything you need to make beautiful half-blind dovetail joints, through dovetail joints and box joints. Woodworkers use dovetail joints to create cabinets, furniture and drawers, Dovetail joints are known for their strength and durability. Dovetail joints don't require mechanical fasteners to stick together like other joinery techniques do. Rather, dovetail joints use pins and tails to interlock together, where one side has a pin that locks into the other side's tail, and then glued together for a solid dovetail construction.
What Joints Types Can You Make?
1/2" wide Half Blind Dovetails spaced 27/32" on center for 1/2" to 1" thick drawer sides and 5/8" to 1" fronts up to 12" high
1/4" wide Half Blind Dovetails for 1/4" to 1/2" thick drawer sides and 5/16" to 1/2" fronts up to 12" high
3/4" wide Through Dovetails spaced 1-1/8" on center for 1/2" to 3/4" thick stock
1/4" wide Box Joint with wood stock 1/4" to 1/2" thick
1/2" wide Box Joint with wood stock 1/4" to 1" thick
Self spacing edge guides allow precise offset for perfectly aligned joints.The steel beams of the dovetail jig secure both work pieces snugly. Since both sides of the half-blind dovetail joint are cut at the same time, a perfect fit is assured for each joint. Detailed instructions are included for each template and joint.
Includes:
MLCS 12" Steel Jig
6 Solid Aluminum Templates
3 Brass Template Guide Bushings (5/16", 3/8" and 5/8")
1/4"-8° Dovetail Carbide-tipped Router Bit, 1/4" shank
1/2"-14° Dovetail Carbide-tipped Router Bit, 1/2" shank
3/4"-14° Dovetail Carbide-tipped Router Bit, 1/2" shank
1/4" Straight Router Bit, 1/4" shank
3/8" Straight Router Bit, 1/2" shank
1/2" Straight Router Bit, 1/4" shank
Detailed Instruction Manual
You May Also Like
