Traditional Table Edge Router Bits 7/16" CD x 5/8" CL x 1/2" shank | MLCS
Need Product Support?
1.800.533.9298
Specifications
(D) Large Diameter: 1-3/8"
(C) Cutting Depth: 7/16"
Profile Height: 3/8"
(L) Cutting Length: 5/8"
Shank Size: 1/2"
Overall Length: 2-5/8"
MLCS Traditional Table Edge Router Bits are used to form a deep, decorative detail found on dining room, coffee or end tables, window sills, chair rails and china cabinets.
One edge or top and bottom edges can be molded depending on wood thickness.
Reversible and can be used as a drop leaf table joint.
2 flute, carbide-tipped with totally enclosed ball bearing guide.
(D) Large Diameter: 1-3/8".
(C) Cutting Depth: 7/16".
(L) Cutting Length: 5/8".
Shank Size: 1/2".
Overall Length: 2-5/8".
The MLCS Difference:
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
Best results are obtained by making several light passes, increasing depth of cut with each pass. To minimize burning on some woods such as cherry, maple or oak, a Router Speed Control can be used to reduce the router speed.
Cuts shown are based on making the maximum profile. Additional profiles can be made by raising the top portion of bit above the wood.
You May Also Like
