Cabinet Door Router Bits - Cove Raised Panel & Back Cutter with Round Over Rail & Stile | MLCS
Need Product Support?
1.800.533.9298
MLCS Cabinet Door Router Bits - Cove Raised Panel & Back Cutter with Round Over Rail & Stile make classic doors with a cove raised panel and round over rail and stile frame.
The Cove Panel Bit puts a classic cove edge on your door. The Round Over Matched Rail and Stile Set makes a strong, precisely mated joint.
Use with 3/4" stock.
Cove Raised Panel with Back Cutter #8697
Produces a flush or reduced upper panel profile or adds a radius to the back of the panel.
Cut the back and front of the panel with one bit.
2 flute, carbide-tipped with fully enclosed ball bearing guide.
Profile: Cove with Undercutter.
Large Diameter: 3-1/8".
Depth of Cut: 1-1/4".
Shank Size: 1/2".
Round Over Rail and Stile Router Bit Set (#8843)
Creates a precisely mated joint that forms an extremely strong "classic" frame for your door.
They cut a 1/4" thick x 3/8" deep tongue on 3/4" stock.
For a stock thickness of 3/4".
Large Diameter: 1-5/8".
Shank: 1/2".
:The MLCS Difference:
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
You May Also Like
