Chamfer Router Bits Set - 15° - 22.5° - 30° - 45° x 1/2" shank | MLCS
Need Product Support?
1.800.533.9298
MLCS Chamfer Router Bits Set is ideal for beveling and decorative edges.
Great for Bevels and Miters.
2-flute, carbide-tipped with totally enclosed ball bearing guide.
This set includes 15° - 22.5° - 30° - 45° chamfer bts.
15° Chamfer #7678
Makes 12 sided boxes.
Makes a 30° Miter Joint.
Ideal for beveling and decorative edges.
All bits two flute, carbide tipped, with totally enclosed ball bearing guides.
(A) Degree: 15°.
(B) Cutting Length: 1".
(L) Cutting Height: 15/16".
(D) Large Diameter: 1".
Overall Length: 2-7/8".
Shank Size: 1/2".
22.5° Chamfer #7679
Makes 8 sided boxes.
Makes a 45° Miter Joint.
Ideal for beveling and decorative edges.
All bits two flute, carbide tipped, with totally enclosed ball bearing guides.
(A) Degree: 22.5°.
(B) Cutting Length: 1".
(L) Cutting Height: 15/16".
(D) Large Diameter: 1-5/16".
Overall Length: 2-7/8".
Shank Size: 1/2".
30° Chamfer #7680
Makes 6 sided boxes.
Makes a 60° Miter Joint.
Ideal for beveling and decorative edges.
All bits two flute, carbide tipped, with totally enclosed ball bearing guides.
(A) Degree: 30°.
(B) Cutting Length: 1".
(L) Cutting Height: 7/8".
(D) Large Diameter: 1-1/2".
Overall Length: 3-1/4".
Shank Size: 1/2".
45° Chamfer #7677
Makes 4 sided boxes.
Makes a 90° Miter Joint.
Ideal for beveling and decorative edges.
All bits two flute, carbide tipped, with totally enclosed ball bearing guides.
(A) Degree: 45°.
(B) Cutting Length: 1".
(L) Cutting Height: 3/4".
(D) Large Diameter: 1-7/8".
Overall Length: 3-1/8".
Shank Size: 1/2".
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
You May Also Like
