![Faux Mullion and Muntin Small Profile Router Bits 3 pc Set with V-Notch Lattice Design | EAGLE AMERICA](https://cdn.commercev3.net/www.hvalleytools.com/images/thumb/199-5805A.jpg)
![Faux Mullion and Muntin Small Profile Router Bits 3 pc Set with V-Notch Lattice Design | EAGLE AMERICA](/images/thumb/v179-3312_t.jpg)
![Faux Mullion and Muntin Small Profile Router Bits 3 pc Set with V-Notch Lattice Design | EAGLE AMERICA](/images/thumb/eagle-america-large.jpg)
Faux Mullion and Muntin Small Profile Router Bits 3 pc Set with V-Notch Lattice Design | EAGLE AMERICA
EAGLE AMERICA Faux Mullion and Muntin Small Profile Router Bits 3 pc Set with V-Notch Lattice Design are designed to give your windows that classic separated window pane look. This set includes our special "V" Groove bit (A). When used with any 1/4" diameter straight bit you will be able to produce the matching interlocking joint. Bits can also be used to make interlocking face frame joints. Also included to finish off the edges with our specially designed colonial accent bit (B). Finally included is our matching rail bit profiles to enable you to cope your muntins to the mullion window frame (C). All bits two flute. Carbide tipped. Made in the USA.
Set Includes Router Bits:
#179-3315 Mullion V-Groove (A)
Cutting Depth (C): 1/4"
Large Diameter (D): 7/8"
Cut Length (L): 3/8"
Radius/Degree (R): 45
Overall Length: 1-5/8"
Shank Size: 1/2"
#179-5815 Mullion Stile (B)
Cutting Depth (C): 3/16"
Large Diameter (D): 7/8"
Cut Length (L): 9/32"
Radius/Degree (R): 5/32"
Overall Length: 2-1/4"
Shank Size:1/2"
#179-5835 Mullion Rail (C)
Cutting Depth (C): 3/16"
Large Diameter (D): 7/8"
Cut Length (L): 9/32"
Radius/Degree (R): 5/32"
Overall Length: 2-1/8"
Shank Size: 1/2"
The Eagle America Difference
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.
Precision-ground shanks.
You May Also Like