Flush Trim - Pattern Router Bits with Top & Bottom Bearings Kits | MLCS PREMIUM
Free Shipping on Orders over $50
Specifications
Large Diam: 3/4"
Cut Height: 2"
Shank Size: 1/2"
MLCS premium Flush Trim-Pattern Router Bit with Top & Bottom Bearing Kits are designed to remove precise amounts of material from the edge of doors or very large panels, or whenever size makes it difficult to use a router table.
By varying the bottom bearing diameter, you can accurately remove 1/16" or 1/8" in two passes.
When using the bit, for the first pass adjust the bottom bearing to run at the bottom of your stock, removing the designated amount from the top of the stock.
For the second pass, readjust the bit height to allow the top bearing to run along the previously cut top of your stock, completing the trimming operation.
Kits are available for stock up to 1-3/8" thick, or 2" thick.
Includes:
3/4" Top and Bottom Bearing Flush Trim/Pattern Bit with two 3/4" OD bearings
Two additional bearings 5/8" and 1/2" OD
Hex Key
Lifetime Guarantee: Against Defects in workmanship and materials.
Micro-grain carbide: Premium fine grain carbide yields a longer cutting life, and allows multiple resharpenings.
High Hook & Shear angles: Allows cutter to slice smoothly into stock, producing the cleanest, splinter free cuts.
Anti-kickback design: Round shoulder between cutters drastically reduces the chance of kickback.
Non-stick coating: Baked on heat resistant coating prevents sawdust, resin and pitch build-up.
Safety Gauge Shank: Lines etched on the shank help you seat the bit in the router collet.
You May Also Like
