Raised Panel Router Bits - Ogee Profile | EAGLE AMERICA
Specifications
Profile: Ogee
Large Diameter: 2-1/2"
Cutting Depth: 1"
Overall Length: 2-1/2"
Shank: 1/2"
Eagle America Raised Panel Router Bits - Ogee Profile has both cove and ogee profiles. It makes attractive drawer fronts, table tops, plaques and moldings. Great for both square and arch (cathedral) door patterns. Use our bits on both square and arch (cathedral) door patterns. Make attractive drawer fronts, table tops, plaques and moldings. Manufactured with a shear angle to produce optimum cuts both with and across the grain. The material size you select will affect how much upper bead profile you will achieve.
A ball bearing guide allows you to follow a pattern.
The carbide tipped bit features an anti-kickback design which controls the cutting edge's depth of cut. The cutter cannot pull into the piece, giving you better control.
NOTE: Beige area on illustrations denotes what you loose with 5/8" material or use with back cutter.
For 5/8" to 3/4" stock.
All bits two flute, carbide tipped with bearing guides.
Made in USA.
The Eagle America Difference
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.
Precision-ground shanks.
You May Also Like
