Edge Banding Shaper Cutters Set
Specifications
Carbide Height: 1"
Large Diameter: 2-5/8"
MLCS Edge Banding Shaper Cutter Set is designed to put hardwood edges on your plywood, particle board or MDF stock.
It's the simple and economical way for you to make your own hardwood edge banding to finish off those plywood or MDF panels and shelves.
Stock Thickness from 1/2" to 1" thick.
Suited for industrial shaping operations.
Cut soft or hard woods, plywood panels, glue-bonded panels, fiberglass or plastics.
These cutters are designed to be worked under 13,000 RPM.
Fit both 1/2" and 3/4" spindles.
All shaper cutters come with 3/4" bores and 1/2" bushing adapters.
Three wing, tungsten carbide tipped.
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
You May Also Like
