45° Rabbet Miter Joint Shaper Cutters for 90° Joint Set
Specifications
Carbide Height: 3/4"
Large Diameter: 2-5/8"
Stock Thickness: 3/4"
MLCS Rabbeting Miter Joint Shaper Cutters Set makes a 90 degree joint by cutting a 45 degree miter rabbet that produces a larger glue surface area than a simple miter joint, with the added advantage of more precise edge alignment.
The completed joint eliminates having any end grain showing on the joints for a clean, consistent grain match.
Great for making boxes, cabinet frames and drawers.
Cut soft or hard woods, plywood panels, glue-bonded panels, fiberglass or plastics.
These cutters are designed to be worked under 13,000 RPM.
Fit both 1/2" and 3/4" spindles.
Stronger and More Precise than a Standard Miter Joint.
All shaper cutters come with 3/4" bores and 1/2" bushing adapters.
Three wing, tungsten carbide tipped.
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.
You May Also Like
